D-Link DGS-3130 Emulator - Page 782

DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Command Default Level Level: 12. Usage Guideline Use this command to configure the system's location information on the Switch. Example This example shows how to configure the system's location information with the string "HQ 15F". Switch# configure terminal Switch(config)# snmp-server location HQ 15F Switch(config)# 76-18 snmp-server name This command is used to configure the system's name information. Use the no form of this command to remove the setting. snmp-server name NAME no snmp-server name Parameters NAME Specifies the string that describes the host name information. The maximum length is 255 characters. As a suggestion do not configure the hostname longer than 10 characters. Default By default, this name is "Switch". Command Mode Global Configuration Mode. Command Default Level Level: 12. Usage Guideline Use this command to configure the system's name information on the Switch. Example This example shows how to configure the system's name to "SiteA-switch". Switch# configure terminal Switch(config)# snmp-server name SiteA-switch Switch(config)# 778