D-Link DGS-3130 Emulator - Page 551
ipv6 mld snooping access-group
View all D-Link DGS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 551 highlights
DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide The MLD snooping global state is disabled by default. Command Mode Interface Configuration Mode. Global Configuration Mode. Command Default Level Level: 12. Usage Guideline For a VLAN to operate with MLD snooping, both the global state and its interface state must be enabled. the setting of IGMP snooping and MLD snooping settings are independent on a VLAN, so they can be enabled simultaneously on the same VLAN. Example This example shows how to disable MLD snooping operation on all VLANs. Switch# configure terminal Switch(config)# no ipv6 mld snooping Switch(config)# This example shows how to enable MLD snooping operation on VLANs that are MLD snooping enabled. Switch# configure terminal Switch(config)# ipv6 mld snooping Switch(config)# This example shows how to enable MLD snooping on VLAN 1. Switch# configure terminal Switch(config)# vlan 1 Switch(config-vlan)# ipv6 mld snooping Switch(config-vlan)# 52-3 ipv6 mld snooping access-group This command is used to restrict the receivers on a subnet to only join the multicast groups that are permitted in a standard IPv6 access list. Use the no form of this command to disable this function. ipv6 mld snooping access-group IPV6-ACCESS-LIST-NAME [vlan VLAN-ID] no ipv6 mld snooping access-group [vlan VLAN-ID] Parameters IPV6-ACCESS-LIST-NAME vlan VLAN-ID Specifies a standard IPv6 access list. To permit users to join a group (*, G), specify "any" in source address field and G in destination address field of the access list entry. (Optional) Specifies a Layer 2 VLAN and applies the filter to packets that arrive on the VLAN. 547