D-Link DGS-3130 Emulator - Page 52
match ip address
View all D-Link DGS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Command Default Level Level: 12. Usage Guideline Use this command to enter the MAC Access-list Configuration mode, and use the permit or deny command to specify the entries. The name must be unique among all access lists. The characters of the name are case sensitive. The biggest unused number in the range of the MAC access list numbers will be assigned automatically. Example This example shows how to enter the MAC access list configuration mode for a MAC access list named "daily profile". Switch# configure terminal Switch(config)# mac access-list extended daily-profile Switch(config-mac-ext-acl)# 4-11 match ip address This command is used to associate an IP access list for the configured sub-map. Use the no form of this command to remove the matched entry. match ip address {ACL-NAME} no match ip address Parameters ACL-NAME Specifies the name of the ACL access list to be configured. The name can be up to 32 characters. Default None. Command Mode VLAN Access-map Sub-map Configuration Mode. Command Default Level Level: 12. Usage Guideline Use this command to associate an IP access list with the configured sub-map. One sub-map can only be associated with one access list (IP access list, IPv6 access list, or MAC access list). The IP sub-map only checks IP packets. Newer commands will overwrite the previous settings. Example This example shows how to configure the match content in the sub-map. 48