D-Link DGS-3130 Emulator - Page 771

DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Switch# configure terminal Switch(config)# snmp-server view interfacesMibView 1.3.6.1.2.1.2 included Switch(config)# snmp-server group guestgroup v3 auth read interfacesMibView Switch(config)# snmp-server group guestgroup v2c read CommunityView write CommunityView Switch(config)# 76-6 snmp-server host This command is used to specify the recipient of the SNMP notification. Use the no form of this command to remove the recipient. snmp-server host {IP-ADDRESS | IPV6-ADDRESS} [version {1 | 2c | 3 {auth | noauth | priv}}] COMMUNITY-STRING [port PORT-NUMBER] no snmp-server host {IP-ADDRESS | IPV6-ADDRESS} Parameters IP-ADDRESS IPV6-ADDRESS version auth noauth priv COMMUNITY-STRING port PORT-NUMBER Specifies the IPv4 address of the SNMP notification host. Specifies the IPv6 address of the SNMP notification host. (Optional) Specifies the version of the SNMP used to send the traps. If not specified, the default is SNMPv1 1 - SNMPv1. 2c - SNMPv2c. 3 - SNMPv3. (Optional) Specifies to authenticate the packet but not to encrypt it. (Optional) Specifies not to authenticate and to encrypt the packet. (Optional) Specifies to both authenticate and to encrypt the packet. Specifies the community string to be sent with the notification packet. If the version is 3, the community string is used as the username as defined in the snmp-sever user command. (Optional) Specifies the UDP port number. The default trap UDP port number is 162. The range of UDP port numbers is from 1 to 65535. Some port numbers may conflict with other protocols. Default By default, the version used is 1. Command Mode Global Configuration Mode. Command Default Level Level: 15. Usage Guideline SNMP notifications are sent as trap packets. The user should create at least one recipient of a SNMP notification by using the snmp-server host command in order for the Switch to send the SNMP notifications. Specify the version of the notification packet for the created user. For SNMPv1 and SNMPv2c, the notification will be sent in the trap protocol data unit (PDU). For SNMPv3, the notification will be sent in the SNMPv2-TRAP-PDU with the SNMPv3 header. 767