D-Link DGS-3130 Emulator - Page 633

DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Switch# configure terminal Switch(config)# interface ethernet 1/0/2 Switch(config-if)# switchport mode private-vlan promiscuous Switch(config-if)# switchport private-vlan mapping 1000 add 1001,1002 Switch(config-if)# 61-7 show vlan private-vlan This command is used to display private VLAN configurations. show vlan private-vlan Parameters None. Default None. Command Mode User/Privileged EXEC Mode. Any Configuration Mode. Command Default Level Level: 1. Usage Guideline This command displays the listing of the private VLAN contained in the private VLAN domain, association of a secondary VLAN with a primary VLAN, and member port of each private VLAN. Example This example shows how to display the private VLAN settings. In this example, there are two private VLAN domains configured. Switch#show vlan private-vlan Primary VLAN 1000 2000 2000 2000 Secondary VLAN 1001 1002 1003 2001 2002 2003 Type ---------Isolated Community Community Isolated Community Community Interface eth1/0/1, eth1/0/16 eth1/0/2, eth1/0/3 eth1/0/2, eth1/0/3 eth1/0/4, eth1/0/13, eth1/0/15 Total Entries: 6 Switch# 629