D-Link DGS-3130 Emulator - Page 328

DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide ip arp inspection vlan VLAN-ID [, | -] logging {acl-match {permit | deny | all | none} | dhcp-bindings {permit | deny | all | none}} no ip arp inspection vlan VLAN-ID [, | -] logging {acl-match | dhcp-bindings} Parameters VLAN-ID , - acl-match permit denny all none dhcp-bindings permit denny all none Specifies the VLAN to enable or disable the logging control function. (Optional) Specifies a series of VLANs, or separate a range of VLANs from a previous range. No space is allowed before and after the comma. (Optional) Specifies a range of VLANs. No space is allowed before and after the hyphen. Specifies the logging criteria for packets that are dropped or permitted based on ACL matches. Specifies logging when permitted by the configured ACL. Specifies logging when denied by the configured ACL. Specifies logging when permitted or denied by the configured ACL. Specifies that ACL-matched packets are not logged. Specifies the logging criteria for packets dropped or permitted based on matches against the DHCP bindings. Specifies logging when permitted by DHCP bindings. Specifies logging when denied by DHCP bindings. Specifies logging when permitted or denied by DHCP bindings. Specifies to prevent the logging of all packets permitted or denied by DHCP bindings. Default All denied or dropped packets are logged. Command Mode Global Configuration Mode. Command Default Level Level: 12. Usage Guideline Use the no form of this command to reset some of the logging criteria to their defaults. Example This example shows how to configure an ARP inspection on VLAN 1 to add packets to a log that matches the ACLs. Switch# configure terminal Switch(config)# ip arp inspection vlan 1 logging acl-match all Switch(config)# 324