D-Link DGS-3130 Emulator - Page 87
session timeout
View all D-Link DGS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Command Mode Global Configuration Mode. Command Default Level Level: 12. Usage Guideline Use this command to configure the terminal connection speed. Some baud rates available on the devices connected to the port might not be supported on the Switch. Example This example shows how to configure the serial port baud rate to 9600 bps. Switch# configure terminal Switch(config)# terminal speed 9600 Switch(config)# 5-23 session timeout This command is used to configure the line session timeout value. Use the no form of this command to revert to the default setting. session-timeout MINUTES no session-timeout Parameters MINUTES Specifies the timeout length in minutes. 0 represents never timeout. Default By default, this value is 3 minutes. Command Mode Line Configuration Mode. Command Default Level Level: 12. Usage Guideline This timer specifies the timeout for auto-logout sessions established by the line that is being configured. Example This example shows how to configure the console session to never timeout. 83