D-Link DGS-3130 Emulator - Page 107
accounting exec, clear aaa counters servers
View all D-Link DGS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Switch# configure terminal Switch(config)# aaa accounting commands 15 cmd-15 start-stop group tacacs+ Switch(config)# line console Switch(config-line)# accounting commands 15 cmd-15 Switch(config-line)# 8-15 accounting exec This command is used to configure the method list used for EXEC accounting for a specific line. Use the no form of this command to disable the accounting EXEC option. accounting exec {default | METHOD-LIST} no accounting exec Parameters default METHOD-LIST Specifies to use the default method list. Specifies the name of the method list to use. Default By default, this option is disabled. Command Mode Line Configuration Mode. Command Default Level Level: 15. Usage Guideline For accounting via the method list to take effect, enable AAA first by using the aaa new-model command. Create the method list first by using the aaa accounting exec command. If the method list does not exist, the command does not take effect. Example This example shows how to configure the EXEC accounting method list with the name of "list-1". It uses the RADIUS server. If the security server does not response, it does not perform accounting. After the configuration, the EXEC accounting is applied to the console. Switch#configure terminal Switch(config)# aaa accounting exec list-1 start-stop group radius Switch(config)# line console Switch(config-line)# accounting exec list-1 Switch(config-line)# 8-16 clear aaa counters servers This command is used to clear the AAA server statistic counters. 103