D-Link DGS-3130 Emulator - Page 21
show history, password-recovery
View all D-Link DGS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide 2-10 show history This command is used to list the commands entered in the current EXEC Mode session. show history Parameters None. Default None. Command Mode User/Privileged EXEC Mode. Any Configuration Mode. Command Default Level Level: 1. Usage Guideline Commands entered are recorded by the system. A recorded command can be recalled in sequence by pressing CTRL+P or the Up Arrow key. The history buffer size is fixed at 20 commands. The function key instructions below display how to navigate the commands in the history buffer. CTRL+P or the Up Arrow key - Recalls commands in the history buffer, beginning with the most recent command. Repeat the key sequence to recall successively older commands. CTRL+N or the Down Arrow key - Returns to more recent commands in the history buffer after recalling commands with Ctrl-P or the Up Arrow key. Repeat the key sequence to recall successively more recent commands. Example This example shows how to display the command buffer history. Switch# show history help history Switch# 2-11 password-recovery This command is used to recover the password related settings. Use the password recovery command in the reset configuration mode. password-recovery Parameters None. 17