D-Link DGS-3130 Emulator - Page 791

Parameters DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide SOURCE-URL DESTINATION-URL member MEMBER-LIST Specifies the source URL to be uploaded to the server. The source URL is located at the member switch. When the running configuration is specified as the source URL, the purpose is to upload the running configuration to the TFTP server. When the system log is specified as source URL, the system log can be retrieved to the TFTP server. Specifies the destination URL for the file download. The destination URL is located on the member switch. When the running configuration is specified as the destination URL, the purpose is to download the running configuration from the TFTP server to member switches. When the firmware is specified as the destination URL, the purpose is to download the firmware from the TFTP server to member switches. The boot image on the member switches will be replaced by the downloaded file. (Optional) Specifies the member switch to download the file. Multiple members can be specified at a time. Use "," to separate multiple IDs, or "-" to denote a range of interface IDs. Default None. Command Mode Privileged EXEC Mode. Command Default Level Level: 15. Usage Guideline This command can be used on Commander Switch to upload files to the server from member switches. In order to distinguish the different member switch's ID, the file name will be appended to the member switch's ID. Example This example shows how to download firmware to the member switch 1. Switch# copy sim tftp://10.10.10.58/switch.had firmware member 1 Download firmware 10.10.10.58/ switch.had to member 1 ?(y/n)[n] y ID MAC Address Status 1 00-02-01-03-01-03 SUCCESS Switch# This example shows how to upload the system log from the member switch 1. 787