D-Link DGS-3130 Emulator - Page 774

DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Default By default, there is one user. User Name: initial. Group Name: initial. Command Mode Global Configuration Mode. Command Default Level Level: 15. Usage Guideline To create an SMNP user, specify the security model that the user uses and the group that the user is created for. To create an SNMPv3 user, the password used for authentication and encryption needs to be specified. An SNMP user is unable to be deleted if it has been associated with a SNMP server host. Example This example shows how the plain-text password is configured for the user "user1" in the SNMPv3 group public. Switch# configure terminal Switch(config)# snmp-server user user1 public v3 auth md5 authpassword priv privpassword Switch(config)# This example shows how the MD5 digest string is used instead of the plain text password. Switch# configure terminal Switch(config)# snmp-server user user1 public v3 encrypted auth md5 00112233445566778899AABBCCDDEEFF Switch(config)# 76-9 snmp-server view This command is used to create or modify a view entry. Use the no form of this command to remove a specified SNMP view entry. snmp-server view VIEW-NAME OID-TREE {included | excluded} no snmp-server view VIEW-NAME Parameters VIEW-NAME OID-TREE included excluded Specifies the name of the view entry. The valid length is 1 to 32 characters. The syntax is general string that does not allow spaces. Specifies the object identifier of the ASN.1 sub-tree to be included or excluded from the view. To identify the sub-tree, specify a text string consisting of numbers, such as 1.3.6.2.4, or a word, such as system. Use the asterisk (*) wildcard in a single sub-identifier to specify a sub-tree family. Specifies the sub-tree to be included in the SNMP view. Specifies the sub-tree to be excluded from the SNMP view. 770