D-Link DGS-3130 Emulator - Page 146
show ipv6 neighbors
View all D-Link DGS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 146 highlights
DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Example This example shows how to display IPv6 interface information. Switch# show ipv6 interface vlan 2 vlan 2 is up, Link status is down IPv6 is enabled, link-local address: FE80::201:1FF:FE02:305 Global unicast address: 200::2/64 (DHCPv6 PD) IPv6 MTU is 1500 bytes RA messages are sent between 66 to 200 seconds RA advertised reachable time is 1200000 milliseconds RA advertised retransmit interval is 0 milliseconds RA advertised life time is 1800 seconds RA advertised O flag is OFF, M flag is OFF RA advertised prefixes 200::/64 valid lifetime is 2592000, preferred lifetime is 604800 Switch# This example shows how to display brief IPv6 interface information. Switch# show ipv6 interface brief vlan 1 is up, Link status is up FE80::201:1FF:FE02:304 vlan 2 is up, Link status is down FE80::201:1FF:FE02:305 200::2 vlan 3 is up, Link status is down FE80::201:1FF:FE02:306 Total Entries: 3 Switch# 10-20 show ipv6 neighbors This command is used to display IPv6 neighbor information. show ipv6 neighbors [INTERFACE-ID] [IPV6-ADDRESS] Parameters INTERFACE-ID IPV6-ADDRESS Specifies the interface to display IPv6 neighbor cache entry. Specifies the IPv6 address to display its IPv6 neighbor cache entry. Default None. 142