D-Link DGS-3130 Emulator - Page 77
ip telnet server, ip telnet service port
![]() |
View all D-Link DGS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Example This example shows how to configure the idle timeout value to 100 seconds. Switch# configure terminal Switch(config)# ip http timeout-policy idle 100 Switch(config)# 5-10 ip telnet server This command is used to enable a Telnet server. Use the no form of this command to disable the Telnet server function. ip telnet server no ip telnet server Parameters None. Default By default, this option is enabled. Command Mode Global Configuration Mode. Command Default Level Level: 12. Usage Guideline This command enables or disables the Telnet server. The SSH access interface is separately controlled by SSH commands. Example This example shows how to enable the Telnet server. Switch# configure terminal Switch(config)# ip telnet server Switch(config)# 5-11 ip telnet service port This command is used to specify the service port for Telnet. Use the no form of this command to revert to the default setting. ip telnet service-port TCP-PORT no ip telnet service-port 73
![](/manual_guide/products/dlink-dgs3130-emulator-9c3be7f/77.png)