D-Link DGS-3130 Emulator - Page 518
show lldp interface
View all D-Link DGS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 518 highlights
DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Switch#show lldp LLDP System Information Chassis ID Subtype : MAC Address Chassis ID : F0-7D-68-36-30-B0 System Name : Switch System Description : Gigabit Ethernet Switch System Capabilities Supported: Repeater, Bridge System Capabilities Enabled : Repeater, Bridge LLDP-MED System Information: Device Class : Network Connectivity Device Hardware Revision : A1 Firmware Revision : 1.00.001 Software Revision : 1.00.001 Serial Number : DGS3130111013 Manufacturer Name : D-Link Corporation Model Name : DGS-3130-30TS Gigabit Ethernet S Asset ID : LLDP Configurations LLDP State : Disabled LLDP Forward State : Disabled Message TX Interval : 30 Message TX Hold Multiplier: 4 ReInit Delay : 2 TX Delay : 2 LLDP-MED Configuration: Fast Start Repeat Count : 4 Switch# 48-21 show lldp interface This command is used to display the LLDP configuration on the physical interface. show lldp interface INTERFACE-ID [, | -] Parameters INTERFACE-ID , - Specifies to the interface ID to be displayed. Valid interfaces are physical interfaces. (Optional) Specifies a series of interfaces or separates a range of interfaces from a previous range. No space is allowed before or after the comma. (Optional) Specifies a range of interfaces. No space is allowed before or after the hyphen. Default None. Command Mode User/Privileged EXEC Mode. 514