D-Link DGS-3130 Emulator - Page 96

DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide 8-2 aaa accounting exec This command is used to configure the method list used for EXEC accounting for a specific line. Use the no form of this command to disable the accounting EXEC. aaa accounting exec {default | LIST-NAME} start-stop METHOD1 [METHOD2...] no aaa accounting exec {default | LIST-NAME} Parameters default LIST-NAME METHOD1 [METHOD2...] Specifies to configure the default method list for EXEC accounting. Specifies the name of the method list. This name can be up to 32 characters long. Specifies the list of methods that the accounting algorithm tries in the given sequence. Enter at least one method or enter up to four methods. The following are keywords that can be used to specify a method. group radius - Specifies to use the servers defined by the RADIUS server host command. group tacacs+ - Specifies to use the servers defined by the TACACS+ server host command. group GROUP-NAME - Specifies to use the server groups defined by the AAA group server command. none - Specifies not to perform accounting. Default No AAA accounting method is configured. Command Mode Global Configuration Mode. Command Default Level Level: 15. Usage Guideline Use this command to configure the method list for EXEC accounting. Example This example shows how to create a method list for accounting of user activities using RADIUS, which will send accounting messages at the start and end time of access. Switch#configure terminal Switch(config)# aaa accounting exec list-1 start-stop group radius Switch(config)# 8-3 aaa accounting network This command is used to account user activity in accessing the network. Use the no form of this command to remove the accounting method list. aaa accounting network default start-stop METHOD1 [METHOD2...] no aaa accounting network default 92