D-Link DGS-3130 Emulator - Page 882

DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide show protocol-vlan {profile [PROFILE-ID [, | -]] | interface [INTERFACE-ID [, | -]]} Parameters profile PROFILE-ID , - interface INTERFACE-ID , - Specifies the protocol group. (Optional) Specifies the protocol group to be displayed. (Optional) Specifies a series of profile IDs, or separate a range of profile IDs from a previous range. No space is allowed before and after the comma. (Optional) Specifies a range of profile IDs. No space is allowed before and after the hyphen. Specifies the interfaces to be displayed. (Optional) Specifies the port to display the protocol VLAN classification setting. (Optional) Specifies a series of interfaces or separates a range of interfaces from a previous range. No space is allowed before or after the comma. (Optional) Specifies a range of interfaces. No space is allowed before or after the hyphen. Default None. Command Mode User/Privileged EXEC Mode. Any Configuration Mode. Command Default Level Level: 1. Usage Guideline Use this command to display the settings for VLAN classification on a port based on the protocol group. Example This example shows how to display the setting for VLAN classification based on the protocol group on ethernet 1/0/1 to 1/0/3. Switch# show protocol-vlan interface ethernet 1/0/1-3 Interface eth1/0/1 eth1/0/2 eth1/0/3 Protocol Group ID 1 10 11 12 2 VLAN ---1 3 2001 3002 100 Priority -------5 0 4 1 6 Switch# This example shows how to display the protocol group profile settings. 878