D-Link DGS-3130 Emulator - Page 402
gvrp vlan create, gvrp forbidden
![]() |
View all D-Link DGS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 402 highlights
DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Switch# configure terminal Switch(config)# interface ethernet 1/0/1 Switch(config-if)# gvrp advertise 1000 Switch(config-if)# 36-5 gvrp vlan create This command is used to enable dynamic VLAN creation. Use the no form of this command to disable the dynamic VLAN creation function. gvrp vlan create no gvrp vlan create Parameters None. Default By default, this option is enabled. Command Mode Global Configuration Mode. Command Default Level Level: 12. Usage Guideline When dynamic VLAN creation is enabled, if a port has learned a new VLAN membership and the VLAN does not exist, the VLAN will be created automatically. Otherwise, the newly learned VLAN will not be created. Example This example shows how to enable the creation of dynamic VLANs registered with the GVRP protocol. Switch# configure terminal Switch(config)# gvrp vlan create Switch(config)# 36-6 gvrp forbidden This command is used to specify a port as being a forbidden member of the specified VLAN. Use the no form of this command to remove the port as a forbidden member of all VLANs. gvrp forbidden {all | [add | remove] VLAN-ID [, | -]} no gvrp forbidden Parameters all Specifies that all VLANs, except VLAN 1, are forbidden on the interface. 398
![](/manual_guide/products/dlink-dgs3130-emulator-9c3be7f/402.png)