D-Link DGS-3130 Emulator - Page 78
ip telnet source-interface
![]() |
View all D-Link DGS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Parameters TCP-PORT DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Specifies the TCP port number. TCP ports are numbered between 1 and 65535. The "well-known" TCP port for the TELNET protocol is 23. Default By default, this value is 23. Command Mode Global Configuration Mode. Command Default Level Level: 12. Usage Guideline This command configures the TCP port number for Telnet access Example This example shows how to change the Telnet service port number to 3000. Switch# configure terminal Switch(config)# ip telnet service-port 3000 Switch(config)# 5-12 ip telnet source-interface This command is used to specify the interface whose IP address will be used as the source address of Telnet packets that initiates a Telnet connection. Use the no form of this command to remove the specification. ip telnet source-interface INTERFACE-ID no ip telnet source-interface Parameters INTERFACE-ID Specifies the interface whose IP address will be used as the source address of packets that initiates a Telnet connection. Default The IP address of the closest interface will be used. Command Mode Global Configuration Mode. Command Default Level Level: 12. 74
![](/manual_guide/products/dlink-dgs3130-emulator-9c3be7f/78.png)