D-Link DGS-3130 Emulator - Page 670
show mls qos interface
![]() |
View all D-Link DGS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 670 highlights
DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Command Mode User/Privileged EXEC Mode. Any Configuration Mode. Command Default Level Level: 1. Usage Guideline This command is used to display the configured aggregated policer. Example This example shows how to display the aggregate policer. Switch# show mls qos aggregate-policer mls qos aggregate-policer agg-policer5 10 1000 conform-action transmit exceed-action drop mls qos aggregate-policer agg-policer5 cir 500 bc 10 pir 1000 be 10 conform-action transmit exceed-action set-dscp-transmit 2 violate-action drop Switch# 63-24 show mls qos interface This command is used to display port level QoS configurations. show mls qos interface INTERFACE-ID [, | -] {cos | scheduler | trust | rate-limit | queue-rate-limit | dscpmutation | map {dscp-color | cos-color | dscp-cos}} Parameters interface INTERFACE-ID , - cos scheduler trust rate-limit queue-rate-limit dscp-mutation map dscp-color map cos-color map dscp-cos Specifies the interfaces to be displayed. (Optional) Specifies a series of interfaces or separates a range of interfaces from a previous range. No space is allowed before or after the comma. (Optional) Specifies a range of interfaces. No space is allowed before or after the hyphen. Specifies to display the port default CoS. Specifies to display the transmit queue scheduling settings. Specifies to display the port trust State. Specifies to display the bandwidth limitation configured for the port. Specifies to display the bandwidth allocation configured for the queue. Specifies to display the DSCP mutation map attached to the interface. Specifies to display the DSCP to color map. Specifies to display the CoS to color map. Specifies to display the mapping of DSCP to CoS Default None. 666
![](/manual_guide/products/dlink-dgs3130-emulator-9c3be7f/670.png)