D-Link DGS-3130 Emulator - Page 693

Default None. DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Command Mode Global Configuration Mode. Command Default Level Level: 12. Usage Guideline A route map can contain multiple route map entries, which is either a permit entry or a deny entry. When a route is checked against a route map, the entry in the route map will be checked whether match the route based on its sequence number in the route map. If an entry matches, the action associated with the entry will be taken and no further check will be done against the remaining entry in the route map. A route map entry can contain multiple match and set statements. To match a route against a route map entry, all of the match statements in the route map rule must be satisfied. When a route map entry is matched, all the set statements in the rule will be performed if the entry is a permit entry. The route will be denied if the matched rule is a deny entry. Example This example shows how to create a rule entry with the sequence number 1 for route map "myPolicy". Switch# configure terminal Switch(config)# route-map myPolicy permit 1 Switch(config-route-map)# 66-7 show route-map This command is used to display information about the route map. show route-map [ROUTE-MAP-NAME] Parameters ROUTE-MAP-NAME (Optional) Specifies the route map to be displayed. Default None. Command Mode User/Privileged EXEC Mode. Any Configuration Mode. Command Default Level Level: 1. Usage Guideline Use this command to display the route map information. 689