D-Link DGS-3130 Emulator - Page 945
Interface, IP Directed Broadcast
![]() |
View all D-Link DGS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 945 highlights
DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Log Message: Errored frame period event received(Port ) Parameters description: interface-id: The interface name. Event description: Errored Frame Seconds Summary Event Log Message: Errored frame seconds summary event received (Port ) Parameters description: interface-id: The interface name. Warning Event description: Remote loopback start Log Message: OAM Remote loopback started (Port ) Parameters description: interface-id: The interface name. Warning Event description: Remote loopback stop Log Message: OAM Remote loopback stopped (Port ) Parameters description: interface-id: The interface name. Warning Interface Log Description Event description: Port link up. Log Message: Port link up, Parameters description: portNum: 1.Interger value;2.Represent the logic port number of the device. link state: for ex: , 100Mbps FULL duplex Event description: Port link down. Log Message: Port link down Parameters description: portNum: 1.Interger value; 2.Represent the logic port number of the device. Severity Informational Informational IP Directed Broadcast Log Description Event description: IP Directed-broadcast rate exceed 50 packets per second on a certain subnet. Log Message: IP Directed Broadcast packet rate is high on subnet. [(IP: %s)] Parameters description: IP: the Broadcast IP destination address. Event description: IP Directed-broadcast rate exceed 100 packets per second Log Message: IP Directed Broadcast rate is high. Severity Informational Informational IPSG Log Description Event description: When there is no hardware rule resource to set DHCP Snooping entry into IPSG table, the syslog will be record. Severity Warning 941
![](/manual_guide/products/dlink-dgs3130-emulator-9c3be7f/945.png)