D-Link DGS-3130 Emulator - Page 451
show ip igmp snooping filter
View all D-Link DGS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 451 highlights
DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Command Default Level Level: 1. Usage Guideline Use this command to display IGMP snooping group information. Example This example shows how to display IGMP snooping group information. Switch# show ip igmp snooping groups Total Group Entries : 1 Total Source Entries: 2 vlan 1, 230.1.1.1 Learned on port: 1/0/3,1/0/5 Switch# 39-25 show ip igmp snooping filter This command is used to display IGMP snooping filter configuration information for all interfaces on the Switch or for a specified interface. show ip igmp snooping filter [interface INTERFACE-ID [, | -]] Parameters interface INTERFACE-ID , - (Optional) Specifies that the interface can be a physical interface or a portchannel. If no interface is specified, IGMP snooping filter information on all interface will be displayed. (Optional) Specifies a series of interfaces or separates a range of interfaces from a previous range. No space is allowed before or after the comma. (Optional) Specifies a range of interfaces. No space is allowed before or after the hyphen. Default None. Command Mode User/Privileged EXEC Mode. Any Configuration Mode. Command Default Level Level: 1. Usage Guideline Use this command to display the IGMP snooping limit and access group information. 447