D-Link DGS-3130 Emulator - Page 779

DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Usage Guideline The SNMP manager manages a SNMP agent by sending SNMP requests to agents and receiving SNMP responses and notifications from agents. The SNMP server on the agent must be enabled before the agent can be managed. Example This example shows how to enable the SNMP server. Switch# configure terminal Switch(config)# snmp-server Switch(config)# 76-14 snmp-server contact This command is used to configure the system contact information for the device. Use the no form of this command to remove the setting. snmp-server contact TEXT no snmp-server contact Parameters TEXT Specifies a string for describing the system contact information. The maximum length is 255 characters The syntax is a general string that allows spaces. Default None. Command Mode Global Configuration Mode. Command Default Level Level: 12. Usage Guideline This command configures the system contact information for management of the device. Example This example shows how to configure the system contact information with the string MIS Department II. Switch# configure terminal Switch(config)# snmp-server contact MIS Department II Switch(config)# 76-15 snmp-server enable traps This command is used to enable the sending of trap packets globally. Use the no form of this command to disable the sending of trap packets. 775