D-Link DGS-3130 Emulator - Page 48

DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Switch#configure terminal Switch(config)#interface ethernet 1/0/2 Switch(config-if)#ip access-group Strict-Control The remaining applicable IP related access entries are 1792, remaining range entries are 32. Switch(config-if)# 4-6 ip access-list This command is used to create or modify an IP access list. This command will enter into the IP access list configuration mode. Use the no form of this command to remove an IP access list. ip access-list [extended] NAME no ip access-list [extended] {NAME} Parameters extended NAME (Optional) Specifies that the IP access list is the extended IP access list, and more fields can be chosen for the filter. If the parameter is not specified, the IP access list is the standard IP access list. Specifies the name of the IP access list to be configured. The maximum length is 32 characters. The first character must be a letter. Default None. Command Mode Global Configuration Mode. Command Default Level Level: 12. Usage Guideline The name must be unique among all access lists. The characters used in the name are case sensitive. The biggest unused number in the range of IP access list numbers will be assigned automatically. Example This example shows how to configure an extended IP access list, named "Strict-Control" and an IP access-list, named "pim-srcfilter". Switch# configure terminal Switch(config)# ip access-list extended Strict-Control Switch(config-ip-ext-acl)# permit tcp any 10.20.0.0 0.0.255.255 Switch(config-ip-ext-acl)# exit Switch(config)# ip access-list pim-srcfilter Switch(config-ip-acl)# permit host 172.16.65.193 any Switch(config-ip-acl)# 44