Dell Force10 S4820T FTOS Command Reference Guide - Page 1029

Command History Version 8.3.19.0 Version 8.3.7.0 Version 7.7.1.0 Introduced on S4820T Introduced on S4810 Introduced on E-Series ip msdp sa-limit e Configure the upper limit of SA (Source-Active) entries in SA-cache. Syntax Parameters Defaults Command Modes Command History Usage Information Related Commands ip msdp sa-limit number To return to the default, use the no ip msdp sa-limit number command. number Enter the maximum number of SA entries in SA-cache. Range 0 to 40000 Default 50000 CONFIGURATION Version 8.3.19.0 Version 8.3.7.0 Version 7.5.1.0 Introduced on S4820T Introduced on S4810 Introduced FTOS counts the SA messages originated by itself and those received from the MSDP peers. When the total SA messages reach this limit, the subsequent SA messages are dropped (even if they pass RPF checking and policy checking). If the total number of SA messages is already larger than the limit when this command is applied, those SA messages that are already in FTOS will continue to be accepted. To enforce the limit in such situation, use the clear ip msdp sa-cache command. ip msdp peer clear ip msdp peer show ip msdp Configure the MSDP peer Clear the MSDP peer. Display the MSDP information ip msdp shutdown e Administratively shut down a configured MSDP peer. Syntax Parameters ip msdp shutdown {peer address} peer address Enter the peer address in a dotted decimal format (A.B.C.D.) Multicast Source Discovery Protocol (MSDP) | 1029