Dell Force10 S4820T FTOS Command Reference Guide - Page 194

www.dell.com | support.dell.com Command Modes Command History Example cam_count interface interface List the count of the CAM rules for this ACL. Enter the keyword interface followed by the interface type and slot/port or number information: • For a 1-Gigabit Ethernet interface, enter the keyword GigabitEthernet followed by the slot/port information. • For a Port Channel interface, enter the keyword port-channel followed by a number: C-Series and S-Series Range: 1-128 E-Series Range: 1 to 32 for EtherScale, 1 to 255 for TeraScale and 1 to 512 for ExaScale. • For a SONET interface, enter the keyword sonet followed by the slot/port information. • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet followed by the slot/port information. • For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE followed by the slot/port information. EXEC EXEC Privilege Version 8.3.19.0 Version 8.5.1.0 Version 8.3.7.0 Version 7.6.1.0 Version 7.5.1.0 pre-Version 6.2.1.1 Introduced on S4820T Added support for 4-port 40G line cards on ExaScale. Introduced on S4810 Support added for S-Series Support added for C-Series Introduced FTOS#show ip accounting access FILTER1 interface gig 1/6 Extended IP access list FILTER1 seq 5 deny ip any 191.1.0.0 /16 count (0x00 packets) seq 10 deny ip any 191.2.0.0 /16 order 4 seq 15 deny ip any 191.3.0.0 /16 seq 20 deny ip any 191.4.0.0 /16 seq 25 deny ip any 191.5.0.0 /16 Table 7-1 defines the information in the example above. Table 7-1. show ip accounting access-lists Command Example Field Field "Extended IP..." "seq 5..." "order 4" Description Displays the name of the IP ACL. Displays the filter. If the keywords count or byte were configured in the filter, the number of packets or bytes processed by the filter is displayed at the end of the line. Displays the QoS order of priority for the ACL entry. 194 | Access Control Lists (ACL)