Dell Force10 S4820T FTOS Command Reference Guide - Page 59

FTOS# Table 3-3. show version Command Fields Lines beginning with Dell Force10 Network... Dell Force10 Operating... Dell Force10 Application... Copyright (c)... Build Time... Build Path... Dell Force10 uptime is... System image... Chassis Type: Control Processor:... Route Processor 1:... Route Processor 2:... 128K bytes... 1 Route Processor... Description Name of the operating system OS version number Software version Copyright information Software build's date stamp Location of the software build files loaded on the system Amount of time the system has been up Image file name Chassis type (E1200, E600, E600i, E300, C300, C150) Control processor information and amount of memory on processor. E-Series route processor 1 information and the amount of memory on that processor. E-Series route processor 2 information and the amount of memory on that processor. Amount and type of memory on system. Hardware configuration of the system, including the number and type of physical interfaces available. upgrade (E-Series version) e Upgrade the bootflash, boot selector, or system image on a processor. Syntax upgrade {bootflash-image | bootselector-image | system-image} {all | linecard linecard-slot | rpm} {booted | file-url} Parameters bootflash-image bootselector-image system-image all linecard linecard-slot Enter the keyword bootflash-image to upgrade the bootflash image. Enter the keyword bootselector-image to upgrade the boot selector image. Use with TAC supervision only. Enter the keyword system-image to upgrade the cache boot image. Enter the keyword all to upgrade the bootflash/boot selector image on all processors in the E-Series. This keyword does not upgrade the bootflash on the standby RPM. Enter the keyword linecard followed by the slot number to change the bootflash image on a specific line card. E-Series Range: 0 to 13 on the E1200; 0 to 6 for the E600; 0 to 5 on the E300 File Management | 59