Dell Force10 S4820T FTOS Command Reference Guide - Page 333

Parameters Command Modes Usage Information Command History To disable debugging, use the no debug ip bgp [ip-address | peer-group peer-group-name] notifications [in | out] command. ip-address peer-group peer-group-name in out (OPTIONAL) Enter the IP address of the neighbor in dotted decimal format. (OPTIONAL) Enter the keyword peer-group followed by the name of the peer group. (OPTIONAL) Enter the keyword in to view BGP notifications received from neighbors. (OPTIONAL) Enter the keyword out to view BGP notifications sent to neighbors. EXEC Privilege Enter no debug ip bgp command to remove all configured debug commands for BGP. Version 8.3.19.0 Version 8.3.7.0 Version 7.8.1.0 Version 7.7.1.0 Introduced on the S4820T. Introduced on the S4810. Introduced support on S-Series Introduced support on C-Series debug ip bgp soft-reconfiguration c e s Enable soft-reconfiguration debug. Syntax Parameters Defaults Command Modes Usage Information debug ip bgp {ip-address | peer-group-name} soft-reconfiguration To disable, use the no debug ip bgp {ip-address | peer-group-name} soft-reconfiguration command. ip-address peer-group-name (OPTIONAL) Enter the IP address of the neighbor in dotted decimal format. (OPTIONAL) Enter the name of the peer group to disable or enable all routers within the peer group. Disabled EXEC Privilege This command turns on BGP soft-reconfiguration inbound debugging. If no neighbor is specified, debug is turned on for all neighbors. Border Gateway Protocol IPv4 (BGPv4) | 333