Dell Force10 S4820T FTOS Command Reference Guide - Page 199

Command Modes Command History Usage Information CONFIGURATION-STANDARD-ACCESS-LIST Version 8.3.19.0 Version 8.3.7.0 Version 8.3.1.0 Version 8.2.1.0 Version 8.1.1.0 Version 7.6.1.0 Version 7.5.1.0 Version 7.4.1.0 Version 6.5.10 Introduced on S4820T Introduced on S4810 Add DSCP value for ACL matching. Allows ACL control of fragmented packets for IP (Layer 3) ACLs. Introduced on E-Series ExaScale Added support for S-Series Added support for C-Series Added support for non-contiguous mask and added the monitor option. Expanded to include the optional QoS order priority for the ACL entry. The order option is relevant in the context of the Policy QoS feature only. Refer to the "Quality of Service" chapter of the FTOS Configuration Guide for more information. When you use the log option, CP processor logs details about the packets that match. Depending on how many packets match the log entry and at what rate, the CP may become busy as it has to log these packets' details. The monitor option is relevant in the context of flow-based monitoring only. Refer to the Port Monitoring chapter.. The C-Series and S-Series cannot count both packets and bytes, so when you enter the count byte options, only bytes are incremented. Note: When ACL logging and byte counters are configured simultaneously, byte counters may display an incorrect value. Configure packet counters with logging instead. Related Commands deny ip access-list standard Assign a IP ACL filter to deny IP packets. Create a standard ACL. resequence access-list c e s Re-assign sequence numbers to entries of an existing access-list. Syntax resequence access-list {ipv4 | ipv6 | mac} {access-list-name StartingSeqNum Step-to-Increment} Parameters ipv4 | ipv6 | mac access-list-name Enter the keyword ipv4, or mac to identify the access list type to resequence. Enter the name of a configured IP access list. Access Control Lists (ACL) | 199