Dell Force10 S4820T FTOS Command Reference Guide - Page 334

www.dell.com | support.dell.com Command History Version 8.3.19.0 Version 8.3.7.0 Version 7.8.1.0 Version 7.7.1.0 Version 7.2.1.0 Introduced on the S4820T. Introduced on the S4810. Introduced support on S-Series Introduced support on C-Series Introduced debug ip bgp updates c e s Enables you to view information about BGP updates. Syntax Parameters Command Modes Usage Information Command History debug ip bgp updates [in | out | prefix-list prefix-list-name] To disable debugging, use the no debug ip bgp [ip-address | peer-group peer-group-name] updates [in | out] command. in out prefix-list prefix-list-name ip-address peer-group-name (OPTIONAL) Enter the keyword in to view only BGP updates received from neighbors. (OPTIONAL) Enter the keyword out to view only BGP updates sent to neighbors. (OPTIONAL) Enter the keyword prefix-list followed by the name of an established prefix list. If the prefix list is not configured, the default is permit (to allow all routes). (OPTIONAL) Enter the IP address of the neighbor in dotted decimal format. (OPTIONAL) Enter the name of the peer group to disable or enable all routers within the peer group. EXEC Privilege Enter no debug ip bgp command to remove all configured debug commands for BGP. Version 8.3.19.0 Version 8.3.7.0 Version 7.7.1 Introduced on the S4820T. Introduced on the S4810. Introduced support on C-Series default-metric c e s Enables you to change the metrics of redistributed routes to locally originated routes. Use this command with the redistribute command. 334 | Border Gateway Protocol IPv4 (BGPv4)