Dell Force10 S4820T FTOS Command Reference Guide - Page 1160

www.dell.com | support.dell.com Table 38-5. show ip pim snooping tib Command Example Fields (continued) Field flags Incoming interface RPF neighbor Outgoing interface list: Description List the flags to define the entries: • S = PIM Sparse Mode • C = directly connected • L = local to the multicast group • P = route was pruned • R = the forwarding entry is pointing toward the RP • F = FTOS is registering this entry for a multicast source • T = packets were received via Shortest Tree Path • J = first packet from the last hop router is received and the entry is ready to switch to SPT • K= acknowledge pending state Displays the reverse path forwarding (RPF) interface towards the RP/source. Displays the next hop from this interface towards the RP/source. Lists the interfaces that meet one of the following criteria: • a directly connect member of the Group. • statically configured member of the Group. • received a (*,G) Join message. show ip pim summary c e s View information about PIM-SM operation. Syntax Command Modes Command History Example show ip pim summary EXEC EXEC Privilege Version 8.3.19.0 Version 8.3.12.0 Version 8.4.1.1 Version 8.1.1.0 Version 7.8.1.0 Introduced on S4820T Introduced on the S4810. Support for the display of PIM-SM snooping status was added on E-Series ExaScale Introduced on E-Series ExaScale Introduced on S-Series FTOS#show ip pim summary PIM TIB version 495 Uptime 22:44:52 Entries in PIM-TIB/MFC : 2/2 Active Modes : PIM-SNOOPING 1160 | PIM-Sparse Mode (PIM-SM)