Dell Force10 S4820T FTOS Command Reference Guide - Page 183
C-Series and S-Series only, option to display information only on the 802.1X-enabled port to which
View all Dell Force10 S4820T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 183 highlights
Parameters Defaults Command Modes Command History Usage Information Example interface mac-address Enter one of the following keywords and slot/port or number information: • For a Gigabit Ethernet interface, enter the keyword GigabitEthernet followed by the slot/port information. • For a Fast Ethernet interface, enter the keyword FastEthernet followed by the slot/port information. • For a Ten Gigabit Ethernet interface, enter the keyword TenGigabitEthernet followed by the slot/port information. (Optional) MAC address of a supplicant. No default values or behavior EXEC EXEC privilege Version 8.3.19.0 Version 8.3.12.0 Version 8.4.2.1 Version 7.6.1.0 Introduced on the S4820T Introduced on the S4810. Introduced mac-address option on the C-Series and S-Series Introduced on C-Series, E-Series, and S-Series C-Series and S-Series only: Enter a supplicant's MAC address using the mac-address option to display information only on the 802.1X-enabled port to which the supplicant is connected. If 802.1X multi-supplicant authentication is enabled on a port, additional 802.1X configuration details (port authentication status, untagged VLAN ID, authentication PAE state, and backend state) are displayed for each supplicant as shown in the last example. FTOS#show dot1x int Gi 2/32 802.1x information on Gi 2/32: Dot1x Status: Enable Port Control: AUTO Port Auth Status: UNAUTHORIZED Re-Authentication: Disable Untagged VLAN id: None Guest VLAN: Enable Guest VLAN id: 10 Auth-Fail VLAN: Enable Auth-Fail VLAN id: 11 Auth-Fail Max-Attempts: 3 Tx Period: 30 seconds Quiet Period: 60 seconds ReAuth Max: 2 Supplicant Timeout: 30 seconds Server Timeout: 30 seconds Re-Auth Interval: 3600 seconds Max-EAP-Req: 2 Auth Type: SINGLE_HOST Auth PAE State: Backend State: Initialize Initialize 802.1X | 183