Dell Force10 S4820T FTOS Command Reference Guide - Page 788

www.dell.com | support.dell.com Command History Reports Leaves MLDv2 Queries MLDv1 Queries Errors: Malformed Packets: 79962 ---18000 0 4510 Version 8.3.19.0 Introduced on the S4820T. Version 8.3.12.0 Introduced on the S4810. 18034 0 ------- Usage Information The following table describes the information in the output example: Valid MLD Packets Reports Leaves MLDv1 queries MLDv2 queries Malformed Packets The total number of packets received and sent from the last time the elapsed time was cleared. The total number of reports (queries and unsolicited reports generated from joins or leaves) that have been received or sent. The number of Multicast leaves that have been sent. The number of MLDv1 queries that have been received. The number of MLDv2 queries that have been received. The number of MLDv1 and MLDv2 packets that do not match the requirement for a valid MLD packet. show ipv6 route c e s Displays the IPv6 routes. Syntax Parameter show ipv6 route [ipv6-address prefix-length] [hostname] [all] [bgp as number] [connected] [isis tag] [list prefix-list name] [ospf process-id] [rip] [static] [summary] ipv6-address prefix-length hostname all bgp connected isis list ospf rip static summary (OPTIONAL) Enter the IPv6 address in the x:x:x:x::x format followed by the prefix length in the /x format. Range: /0 to /128. The :: notation specifies successive hexadecimal fields of zeros. (OPTIONAL) View information for this IPv6 routes with Host Name (OPTIONAL) View information for all IPv6 routes (OPTIONAL) View information for all IPv6 BGP routes (OPTIONAL) View only the directly connected IPv6 routes. (OPTIONAL) View information for all IPv6 IS-IS routes (OPTIONAL) View the IPv6 prefix list (OPTIONAL) View information for all IPv6 OSPF routes (OPTIONAL for E-Series only) View information for all IPv6 RIP routes (OPTIONAL) View only routes configured by the ipv6 route command. (OPTIONAL) View a brief list of the configured IPv6 routes. 788 | IPv6 Basics