Dell Force10 S4820T FTOS Command Reference Guide - Page 115

Table 4-1. Descriptions for show linecard output Field Num Ports Up Time FTOS Version Jumbo Capable Boot Flash Ver Memory Size Temperature Power Status Voltage Serial Number Part Num Vendor ID Date Code Description Displays the number of ports in the line card. Displays the number of hours and minutes the card is online. Displays the operating software version. Displays Yes or No indicating if the line card can support Jumbo frames. This field does not state whether the chassis is operating in EtherScale or TeraScale mode. Displays the two possible Bootflash versions. The [Booted] keyword next to the version states which version was used at system boot. List the memory of the line card processor. Displays the temperature of the line card. Minor alarm status if temperature is over 65° C. Lists the type of power modules used in the chassis: • AC = AC power supply • DC = DC Power Entry Module (PEM) Displays OK if the line voltage is within range. Displays the line card serial number. Displays the line card part number. Displays an internal code, which specifies the manufacturing vendor. Displays the line card's manufacturing date. Related Commands linecard show interfaces linecard show chassis show rpm show sfm Pre-configure a line card in a currently empty slot of the system or a different line card type for the slot. Display information on all interfaces on a specific line card. View information on all elements of the system. View information on the RPM. View information on the SFM. show linecard boot-information e View the line card status and boot information. Syntax show linecard boot-information Command Modes EXEC EXEC Privilege Control and Monitoring | 115