Dell Force10 S4820T FTOS Command Reference Guide - Page 1157
show ip pim snooping neighbor
View all Dell Force10 S4820T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1157 highlights
Syntax Parameters Command Modes Command History Example show ip pim snooping interface [vlan vlan-id] vlan vlan-id (OPTIONAL) Enter a VLAN ID to display information about a specified VLAN configured for PIM-SM snooping. Valid VLAN IDs: 1 to 4094. EXEC EXEC Privilege Version 8.3.19.0 Version 8.3.12.0 Version 8.4.1.1 Introduced on S4820T Introduced on the S4810. Introduced on E-Series ExaScale FTOS#show ip pim snooping interface Interface Ver Nbr DR DR Count Prio Vlan 2 v2 3 1 165.87.32.2 Table 38-3. show ip pim snooping interface Command Example Fields Field Interface Ver/Mode Nbr Count DR Prio DR Description Displays the VLAN interfaces with PIM-SM snooping enabled. Displays the PIM version number for each VLAN interface with PIM-SM snooping enabled: • v2 = PIM version 2 • S = PIM Sparse mode Displays the number of neighbors learned through PIM-SM snooping on the interface. Displays the Designated Router priority value configured on the interface (ip pim dr-priority command). Displays the IP address of the Designated Router for that interface. show ip pim snooping neighbor ex Display information on PIM neighbors learned through PIM-SM snooping. Syntax Parameters Command Modes show ip pim snooping neighbor [vlan vlan-id] vlan vlan-id (OPTIONAL) Enter a VLAN ID to display information about PIM neighbors that was discovered by PIM-SM snooping on a specified VLAN. Valid VLAN IDs: 1 to 4094. EXEC EXEC Privilege PIM-Sparse Mode (PIM-SM) | 1157