Dell Force10 S4820T FTOS Command Reference Guide - Page 1231
qos-policy-input
View all Dell Force10 S4820T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1231 highlights
Usage Output policy map is used to assign traffic to different flows using QoS policy. This command Information enables the policy-map-output configuration mode (conf-policy-map-out). Related Commands service-queue policy-aggregate service-policy output Assign a class map and QoS policy to different queues. Allow an aggregate method of configuring per-port QoS via policy maps. Apply an output policy map to the selected interface. qos-policy-input c e s Create a QoS input policy on the router. Syntax qos-policy-input qos-policy-name [layer2] To remove an existing input QoS policy from the router, use no qos-policy-input qos-policy-name [layer2] command. Parameters qos-policy-name layer2 Enter your input QoS policy name in character format (32 character maximum). (OPTIONAL) Enter the keyword layer2 to specify a Layer 2 Class Map. Default: Layer 3 Defaults Layer 3 Command Modes CONFIGURATION Command History Version 8.3.19.0 Version 8.3.7.0 Version 8.2.1.0 Version 7.6.1.0 Version 7.5.1.0 Version 7.4.1.0 Introduced on S4820T Introduced on S4810 Policy name character limit increased from 16 to 32. Introduced on S-Series Introduced on C-Series E-Series Only: Expanded to add support for Layer 2 Usage Information Use this command to specify the name of the input QoS policy. Once input policy is specified, rate-police can be defined. This command enables the qos-policy-input configuration mode-(conf-qos-policy-in). Quality of Service (QoS) | 1231