Dell Force10 S4820T FTOS Command Reference Guide - Page 1084

www.dell.com | support.dell.com FTOS# 08:14:24 : OSPF(100:00): Xmt. v:2 t:1(HELLO) l:44 rid:192.1.1.1 aid:0.0.0.1 chk:0xa098 aut:0 auk: keyid:0 to:Gi 4/3 dst:224.0.0.5 netmask:255.255.255.0 pri:1 N-, MC-, E+, T-, hi:10 di:40 dr:90.1.1.1 bdr:0.0.0.0 Table 37-1. Output Descriptions for debug ip ospf process-id packet Field 8:14 OSPF v: t: l: rid: aid: chk: aut: auk: keyid: to: dst: netmask: pri: Description Displays the time stamp. Displays the OSPF process ID: instance ID. Displays the OSPF version. FTOS supports version 2 only. Displays the type of packet sent: • 1 - Hello packet • 2 - database description • 3 - link state request • 4 - link state update • 5 - link state acknowledgement Displays the packet length. Displays the OSPF router ID. Displays the Autonomous System ID. Displays the OSPF checksum. States if OSPF authentication is configured. One of the following is listed: • 0 - no authentication configured • 1 - simple authentication configured using the ip ospf authentication-key command) • 2 - MD5 authentication configured using the ip ospf message-digest-key command. If the ip ospf authentication-key command is configured, this field displays the key used. If the ip ospf message-digest-key command is configured, this field displays the MD5 key Displays the interface to which the packet is intended. Displays the destination IP address. Displays the destination IP address mask. Displays the OSPF priority 1084 | Open Shortest Path First (OSPFv2)