Dell Force10 S4820T FTOS Command Reference Guide - Page 840

www.dell.com | support.dell.com Related Commands The neighbor shutdown command terminates all BGP sessions on the BGP neighbor or BGP peer group. Use this command with caution as it terminates the specified BGP sessions. When a neighbor or peer group is shutdown, use the show ip bgp ipv6 unicast summary command to confirm its status. show ip bgp ipv6 unicast summary show ip bgp ipv6 unicast neighbors Display the current BGP configuration. Display IPv6 routing information exchanged by BGP neighbors. neighbor soft-reconfiguration inbound c et Enable a BGP soft-reconfiguration and start storing updates for inbound IPv6 unicast routes. Syntax Parameters Defaults Command Modes Usage Information neighbor {ipv4-address | ipv6-address | peer-group-name} soft-reconfiguration inbound ipv4-address | ipv6-address peer-group-name Enter the IP address of the neighbor for which you want to start storing inbound routing updates. Enter the name of the peer group for which you want to start storing inbound routing updates. Disabled ROUTER BGPv6 ADDRESS FAMILY (conf-router_bgpv6_af) This command enables soft-reconfiguration for the specified BGP neighbor. BGP will store all updates for inbound IPv6 unicast routes received by the neighbor but will not reset the peer-session. Caution: Inbound update storage is a memory-intensive operation. The entire BGP update database from the neighbor is stored in memory regardless of the inbound policy results applied on the neighbor. Related Commands Command History show ip bgp ipv6 unicast neighbors Display IPv6 routing information exchanged by BGP neighbors. Version 8.3.19.0 Version 8.4.1.0 Version 7.8.1.0 Version 7.7.1.0 Version 7.4.1.0 Introduced on S4820T Added support for IPv4 multicast and IPv4 unicast address families Introduced support on S4810 Introduced support on C-Series Introduced 840 | IPv6 Border Gateway Protocol (IPv6 BGP)