Dell Force10 S4820T FTOS Command Reference Guide - Page 1158

www.dell.com | support.dell.com Command History Example Version 8.3.19.0 Version 8.3.12.0 Version 8.4.1.1 Introduced on S4820T Introduced on the S4810. Introduced on E-Series ExaScale FTOS#show ip pim snooping neighbor Neighbor Interface Uptime/Expires Ver DR Prio Address 165.87.32.2 Vl 2 [Gi 4/13 ] 00:04:03/00:01:42 v2 1 165.87.32.10 Vl 2 [Gi 4/11 ] 00:00:46/00:01:29 v2 0 165.87.32.12 Vl 2 [Gi 4/20 ] 00:00:51/00:01:24 v2 0 Table 38-4. show ip pim snooping neighbor Command Example Fields Field Neighbor address Interface Uptime/expires Ver DR prio/Mode Description Displays the IP address of the neighbor learned through PIM-SM snooping. Displays the VLAN ID number and slot/port on which the PIM-SM-enabled neighbor was discovered. Displays the amount of time the neighbor has been up followed by the amount of time until the neighbor is removed from the multicast routing table (that is, until the neighbor hold time expires). Displays the PIM version number. • v2 = PIM version 2 Displays the Designated Router priority and the mode. • 1 = default Designated Router priority (use ip pim dr-priority) • DR = Designated Router • S = Sparse mode show ip pim snooping tib ex Display information from the tree information base (TIB) discovered by PIM-SM snooping about multicast group members and states. Syntax Parameters Command Modes show ip pim snooping tib [vlan vlan-id] [group-address [source-address]] vlan vlan-id group-address source-address (OPTIONAL) Enter a VLAN ID to display TIB information discovered by PIM-SM snooping on a specified VLAN. Valid VLAN IDs: 1 to 4094. (OPTIONAL) Enter the group address in dotted decimal format (A.B.C.D) to display TIB information discovered by PIM-SM snooping for a specified multicast group. (OPTIONAL) Enter the source address in dotted decimal format (A.B.C.D) to display TIB information discovered by PIM-SM snooping for a specified multicast source. EXEC 1158 | PIM-Sparse Mode (PIM-SM)