Dell Force10 S4820T FTOS Command Reference Guide - Page 1113

10.2.2.0 10.2.3.0 10.2.4.0 11.1.1.0 11.1.2.0 12.1.2.0 13.1.1.0 13.1.2.0 172.16.1.0 FTOS> 11.1.2.1 11.1.2.1 13.1.1.1 11.1.2.1 11.1.2.1 192.68.135.2 13.1.1.1 13.1.1.1 13.1.1.1 718 0x80000002 0x7927 0 718 0x80000002 0x6e31 0 1184 0x80000068 0x45db 0 718 0x80000002 0x831e 0 718 0x80000002 0x7828 0 1663 0x80000054 0xd8d6 0 1192 0x8000006b 0x2718 0 1184 0x8000006b 0x1c22 0 148 0x8000006d 0x533b 0 Table 37-3. Command Output Description: show ip ospf process-id database Field Link ID ADV Router Age Seq# Checksum Link count Description Identifies the router ID. Identifies the advertising router's ID. Displays the link state age. Identifies the link state sequence number. This number enables you to identify old or duplicate link state advertisements. Displays the Fletcher checksum of an LSA's complete contents. Displays the number of interfaces for that router. Related Commands show ip ospf database asbr-summary Displays only ASBR summary LSA information. show ip ospf database asbr-summary c e s Display information about AS Boundary LSAs. Syntax show ip ospf process-id database asbr-summary [link-state-id] [adv-router ip-address] Parameters process-id link-state-id adv-router ip-address Enter the OSPF Process ID to show a specific process. If no Process ID is entered, command applies only to the first OSPF process. (OPTIONAL) Specify LSA ID in dotted decimal format. The LSA ID value depends on the LSA type, and it can be one of the following: • the network's IP address for Type 3 LSAs or Type 5 LSAs • the router's OSPF router ID for Type 1 LSAs or Type 4 LSAs • the default destination (0.0.0.0) for Type 5 LSAs (OPTIONAL) Enter the keywords adv-router ip-address to display only the LSA information about that router. Command Modes EXEC EXEC Privilege Command History Version 8.3.19.0 Version 8.3.7.0 Introduced on S4820T Introduced on S4810 Open Shortest Path First (OSPFv2) | 1113