Dell Force10 S4820T FTOS Command Reference Guide - Page 924

www.dell.com | support.dell.com Defaults Padding of hello PDUs is enabled (ON). Command Modes INTERFACE Command History Version 8.3.19.0 Version 8.3.12.0 Introduced on S4820T Introduced on S4810 Usage Hello PDUs are "padded" only when both the global and interface padding options are ON. Turning Information either one OFF will disable padding for the corresponding interface(s). Related Commands hello padding Turn ON or OFF padding for LAN and point-to-point hello PDUs. isis ipv6 metric e Assign metric to an interface for use with IPv6 information. Syntax isis ipv6 metric default-metric [level-1 | level-2] To return to the default values, enter no ipv6 isis metric [default-metric] [level-1 | level-2] command. Parameters default-metric level-1 level-2 Metric assigned to the link and used to calculate the cost from each other router via the links in the network to other destinations. You can configure this metric for Level 1 or Level 2 routing. Range:0 to 16777215 Default: 10 (OPTIONAL) Enter level-1 to configure the shortest path first (SPF) calculation for Level 1 (intra-area) routing. This is the default. (OPTIONAL) Enter level-2 to configure the SPF calculation for Level 2 (inter-area) routing. Defaults default-metric = 10; level-1 (if not otherwise specified) Command Modes INTERFACE Command History Version 8.3.19.0 Version 8.3.12.0 Version 7.5.1.0 Introduced on S4820T Introduced on S4810 Introduced on E-Series Usage Dell Force10 recommends configuring metrics on all interfaces. Without configuring this command, Information the IS-IS metrics are similar to hop-count metrics. 924 | Intermediate System to Intermediate System (IS-IS)