Dell Force10 S4820T FTOS Command Reference Guide - Page 1085

Table 37-1. Output Descriptions for debug ip ospf process-id packet Field N, MC, E, T hi: di: dr: bdr: Description Displays information available in the Options field of the HELLO packet: • N + (N-bit is set) • N - (N-bit is not set) • MC+ (bit used by MOSPF is set and router is able to forward IP multicast packets) • MC- (bit used by MOSPF is not set and router cannot forward IP multicast packets) • E + (router is able to accept AS External LSAs) • E - (router cannot accept AS External LSAs) • T + (router can support TOS) • T - (router cannot support TOS) Displays the amount of time configured for the HELLO interval. Displays the amount of time configured for the DEAD interval. Displays the IP address of the designated router. Displays the IP address of the Border Area Router. default-information originate c e s Configure the FTOS to generate a default external route into an OSPF routing domain. Syntax default-information originate [always] [metric metric-value] [metric-type type-value] [route-map map-name] To return to the default values, enter no default-information originate. Parameters always metric metric-value metric-type type-value route-map map-name (OPTIONAL) Enter the keyword always to specify that default route information must always be advertised. (OPTIONAL) Enter the keyword metric followed by a number to configure a metric value for the route. Range: 1 to 16777214 (OPTIONAL) Enter the keyword metric-type followed by an OSPF link state type of 1 or 2 for default routes. The values are: • 1 = Type 1 external route • 2 = Type 2 external route. (OPTIONAL) Enter the keyword route-map followed by the name of an established route map. Defaults Disabled. Command Modes ROUTER OSPF Command History Version 8.3.19.0 Version 8.3.7.0 Introduced on S4820T Introduced on S4810 Open Shortest Path First (OSPFv2) | 1085