Dell Force10 S4820T FTOS Command Reference Guide - Page 1052

www.dell.com | support.dell.com Related Commands Version 8.3.7.0 Introduced on S4810 E-Series legacy command show ip mroute View the E-Series routing table. ip multicast-lag-hashing e Distribute multicast traffic among Port Channel members in a round-robin fashion. Syntax ip multicast-lag-hashing To revert to the default, enter no ip multicast-lag-hashing. Defaults Disabled Command Modes CONFIGURATION Command History Usage Information Version 6.3.1.0 Introduced for E-Series By default, one Port Channel member is chosen to forward multicast traffic. With this feature turned on, multicast traffic will be distributed among the Port Channel members in a round-robin fashion. This feature applies to the routed multicast traffic. If IGMP Snooping is turned on, this feature also applies to switched multicast traffic. Related Commands ip multicast-limit Enable IP multicast forwarding. ip multicast-limit c e s Use this feature to limit the number of multicast entries on the system. Syntax Parameters Defaults Command Modes ip multicast-limit limit limit Enter the desired maximum number of multicast entries on the system. E-Series Range: 1 to 50000 E-Series Default: 15000 C-Series Range: 1 to 10000 C-Series Default: 4000 S-Series Range: 1 to 2000 S-Series Default: 400 As above CONFIGURATION 1052 | Multicast