Dell Force10 S4820T FTOS Command Reference Guide - Page 1407
show sflow
View all Dell Force10 S4820T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1407 highlights
show sflow c e s Display the current sFlow configuration Syntax Parameters Command Modes Command History Example show sflow [interface] interface (OPTIONAL) Enter the following keywords and slot/port or number information: • For an 100/1000 Ethernet interface, enter the keyword GigabitEthernet followed by the slot/port information. • For a 1-Gigabit Ethernet interface, enter the keyword GigabitEthernet followed by the slot/port information. • For a Loopback interface, enter the keyword loopback followed by a number from 0 to 16383. • For a SONET interface, enter the keyword sonet followed by the slot/port information. • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet followed by the slot/port information. EXEC EXEC Privilege Version 8.3.19.0 Version 8.3.7.0 Version 8.2.1.0 Version 8.1.1.0 Version 7.7.1.0 Version 7.6.1.0 Version 6.2.1.1 Introduced on S4820T Introduced on S4810 Introduces on S-Series Stacking Introduced on E-Series ExaScale Introduced on S-Series Introduced on C-Series Introduced on E-Series FTOS#show sflow sFlow services are enabled Global default sampling rate: 32768 Global default counter polling interval: 20 1 collectors configured Collector IP addr: 133.33.33.53, Agent IP addr: 133.33.33.116, UDP port: 6343 0 UDP packets exported 0 UDP packets dropped 165 sFlow samples collected 0 sFlow samples dropped due to sub-sampling Linecard 1 Port set 0 H/W sampling rate 8192 Gi 1/16: configured rate 8192, actual rate 8192, sub-sampling rate 1 Gi 1/17: configured rate 16384, actual rate 16384, sub-sampling rate 2 Linecard 3 Port set 1 H/W sampling rate 16384 Gi 3/40: configured rate 16384, actual rate 16384, sub-sampling rate 1 FTOS# sFlow | 1407