Dell Force10 S4820T FTOS Command Reference Guide - Page 1439

Parameters Defaults Command Modes Command History Related Commands Usage Information To return to the default values, enter default logging trap. To disable logging, enter no logging trap. level Indicate a value from 0 to 7 or enter one of the following parameters: emergencies, alerts, critical, errors, warnings, notifications, informational, or debugging. The default is 6. 6 or informational CONFIGURATION Version 8.3.19.0 Introduced on S4820T Version 8.3.11.1 Introduced on Z9000 Version 8.3.7.0 Introduced on S4810 Version 7.6.1.0 Support added for S-Series Version 7.5.1.0 Support added for C-Series E-Series legacy command logging logging on Enable the logging to another device. Enables logging. To block a type of message parameter, set the logging trap level to a lower number. For example, to block severity messages at level 6, set the level to 5. show logging c e s z Display the logging settings and system messages logged to the internal buffer of the switch. Syntax show logging [number | history [reverse] [number] | reverse [number] | summary] Parameters number history reverse summary (OPTIONAL) Enter the number of message to be displayed on the output. Range: 1 to 65535 (OPTIONAL) Enter the keyword history to view only information in the Syslog history table. (OPTIONAL) Enter the keyword reverse to view the Syslog messages in FIFO (first in, first out) order. (OPTIONAL) Enter the keyword summary to view a table showing the number of messages per type and per slot. Slots *7* and *8* represent RPMs. Command Modes EXEC EXEC Privilege Simple Network Management Protocol and Syslog | 1439