Dell Force10 S4820T FTOS Command Reference Guide - Page 725

c e Display the IPv6 static routes configured for the management interface. Syntax Parameters Command Modes Command History Example show ipv6 management-route [all | connected | summary | static] all connected summary static Enter the keyword all to view all IP addresses assigned to all Management interfaces on the switch. Enter the keyword connected to view only routes directly connected to the Management interface. Enter the keyword summary to view a table listing the number of active and non-active routes and their sources. Enter the keyword static to view non-active routes also. EXEC Privilege Version 8.3.19.0 Version 8.4.1.0 Version 8.3.7.0 Introduced on S4820T Introduced on C- and E-Series Introduced on S4810 FTOS#show ipv6 management-route IPv6 Destination Gateway ------- 2001:34::0/64 ManagementEthernet 0/0 2001:68::0/64 2001:34::16 FTOS# State ----Connected Active show ip protocols c e s View information on all routing protocols enabled and active on the switch. Syntax Command Modes Command History show ip protocols EXEC EXEC Privilege Version 8.3.19.0 Introduced on S4820T Version 8.3.7.0 Introduced on S4810 Version 8.1.1.0 Introduced on E-Series ExaScale Version 7.6.1.0 Regular evaluation optimization enabled/disabled added to display output Version 7.6.1.0 Introduced on S-Series Version 7.5.1.0 Introduced on C-Series pre-Version 6.1.1.0 Introduced for E-Series IPv4 Routing | 725