Dell Force10 S4820T FTOS Command Reference Guide - Page 993

packets interface Enter the keyword packets to enable debugging of FEFD to view information on packets sent and received. (OPTIONAL) Enter the following keywords and slot/port or number information: • For a 1-Gigabit Ethernet interface, enter the keyword GigabitEthernet followed by the slot/port information. • For a SONET interface, enter the keyword sonet followed by the slot/port information. • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet followed by the slot/port information. • For a 1-Gigabit Ethernet interface, enter the keyword GigabitEthernet followed by the slot/port information. • For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE followed by the slot/ port information. Command Modes EXEC Privilege Related Commands fefd fefd reset Enable Far-End Failure Detection on an interface. Enable FEFD globally on the system. Command History Version 8.3.19.0 Version 8.3.12.0 Introduced on S4820T. Introduced on S4810. Legacy E-Series command fefd e Enable Far-End Failure Detection on an interface. Syntax Defaults Command Modes Usage Information Related Commands Command History fefd To disable FEFD on an interface, enter no fefd. Disabled. INTERFACE When you enter no fefd for an interface and fefd-global, FEFD is enabled on the interface because the no fefd command is not retained in the configuration file. To keep the interface FEFD disabled when the global configuration changes, use the fefd reset command. fefd disable fefd reset fefd mode Disable Far-End Failure Detection on an interface. Enable FEFD globally on the system. Change the FEFD mode on an interface. Version 8.3.19.0 Introduced on S4820T. Layer 2 | 993