Dell Force10 S4820T FTOS Command Reference Guide - Page 544

www.dell.com | support.dell.com • A VLAN configured as control VLAN for a ring cannot be configured as control or member VLAN for any other ring. • Member VLANs across multiple rings are not supported in Master nodes. • If multiple rings share one or more member VLANs, they cannot share any links between them. • Each ring can have only one Master node; all others are Transit nodes. clear frrp c e Clear the FRRP statistics counters. Syntax Parameters Defaults Command Modes Command History Example Usage Information Related Commands clear frrp [ring-id] ring-id (Optional) Enter the ring identification number. Range: 1 to 255 No default values or behavior EXEC Version 8.3.19.0 Version 8.3.7.0 Version 8.2.1.0 Version 7.5.1.0 Introduced for S4820T Introduced for S4810 Introduced for the C-Series Introduced FTOS#clear frrp Clear frrp statistics counter on all ring [confirm] yes FTOS#clear frrp 4 Clear frrp statistics counter for ring 4 [confirm] yes FTOS# Executing this command, without the optional ring-id, will clear statistics counters on all the available rings. FTOS requires a command line confirmation before the command is executed. This commands clears the following counters: • hello Rx and Tx counters • Topology change Rx and Tx counters • The number of state change counters show frrp Display the Resilient Ring Protocol configuration 544 | Force10 Resilient Ring Protocol (FRRP)