Dell Force10 S4820T FTOS Command Reference Guide - Page 591

Parameters Command Modes Command History Usage Information Example interface (OPTIONAL) Enter the interface type and slot/port information: • For a 100/1000 Ethernet interface, enter the keyword gigabitethernet followed by the slot/port information. • For a 1-Gigabit Ethernet interface, enter the keyword gigabitethernet followed by the slot/port information. • For a Port Channel interface, enter the keyword port-channel followed by a number: C-Series and S-Series Range: 1 to 128 E-Series Range: 1 to 32 for EtherScale, 1 to 255 for TeraScale and 1 to 512 for ExaScale. • For a Loopback interface, enter the keyword loopback followed by a number from 0 to 16383. • For a SONET interface, enter the keyword sonet followed by the slot/port information. • For a 10-Gigabit Ethernet interface, enter the keyword tengigabitethernet followed by the slot/port information. • For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE followed by the slot/port information. • For a VLAN interface enter the keyword vlan followed by a number from 1 to 4094. EXEC EXEC Privilege Version 8.3.19.0 Introduced on S4820T Version 8.3.7.0 Introduced on S4810 Version 7.6.1.0 Introduced on S-Series Version 7.5.1.0 Introduced on C-Series E-Series legacy command IGMP commands accept only non-VLAN interfaces - specifying VLAN will not yield a results. FTOS#show ip igmp interface GigabitEthernet 0/0 is down, line protocol is down Internet protocol processing disabled GigabitEthernet 0/5 is down, line protocol is down Internet protocol processing disabled GigabitEthernet 0/6 is down, line protocol is down Internet protocol processing disabled GigabitEthernet 0/7 is up, line protocol is down Internet protocol processing disabled GigabitEthernet 7/9 is up, line protocol is up Internet address is 10.87.5.250/24 IGMP is enabled on interface IGMP query interval is 60 seconds IGMP querier timeout is 120 seconds IGMP max query response time is 10 seconds IGMP last member query response interval is 1000 ms IGMP activity: 0 joins, 0 leaves IGMP querying router is 10.87.5.250 (this system) IGMP version is 2 FTOS# Internet Group Management Protocol (IGMP) | 591