Dell Force10 S4820T FTOS Command Reference Guide - Page 1457
storm-control broadcast Configuration, E-Series Only, C-Series and S-Series Only
View all Dell Force10 S4820T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1457 highlights
Example (E-Series) Example (C-Series) FTOS#show storm-control unknown-unicast gigabitethernet 11/1 Unknown-unicast storm control configuration Interface Direction Percentage Wred Profile Gi 11/1 Ingress 5.9 - Gi 11/1 Egress 5.7 w8 FTOS# FTOS#show storm-control unknown-unicast gigabitethernet 3/0 Unknown-unicast storm control configuration Interface Direction Packets/Second Gi 3/0 Ingress 1000 FTOS# storm-control broadcast (Configuration) c e s Configure the percentage of broadcast traffic allowed in or out of the network. Syntax Parameters Defaults Command Modes Command History storm-control broadcast [percentage decimal_value in | out] | [wred-profile name]] [packets_per_second in] To disable broadcast rate-limiting, use the storm-control broadcast [percentage decimal_value in | out] | [wred-profile name]] [packets_per_second in] command. percentage decimal_value in | out wred-profile name packets_per_second in E-Series Only: Enter the percentage of broadcast traffic allowed in or out of the network. Optionally, you can designate a decimal value percentage, for example, 55.5%. Percentage: 0 to 100 0 % blocks all related traffic 100% allows all traffic into the interface Decimal Range: .1 to .9 E-Series Only: (Optionally) Enter the keyword wred-profile followed by the profile name to designate a wred-profile. C-Series and S-Series Only: Enter the packets per second of broadcast traffic allowed into the network. Range: 0 to 33554431 No default behavior or values CONFIGURATION (conf) Version 8.3.19.0 Version 8.3.7.0 Introduced on S4820T Introduced on S4810 Storm Control | 1457